Lab guide · Quality and testing
How to Verify a Peptide COA With the Testing Lab Itself
How to verify a peptide COA comes down to asking the testing laboratory, not the seller, whether the report is genuine. This guide explains the task number and unique key system that Janoshik uses, the step-by-step check, what verification proves and the things it does not prove, and the red flags that a document may have been altered.
Key takeaways
- A verifiable Janoshik report carries a task number at the top and a unique key at the bottom; if either is missing, the lab says the report cannot be verified.
- Verification means entering both on the lab’s own site, not a link supplied by the seller, and comparing every field with your copy.
- A report is legitimate only if it matches the version stored in the lab’s system.
- Verification proves the report is authentic. It does not prove that the vial in your hand came from the tested batch or that the sample was drawn fairly.
Why verify a COA at all
A certificate of analysis is a document, and documents can be copied, edited or reused. Verifying with the testing laboratory itself removes the seller from the chain: the lab can confirm whether it issued that report and what it said. It is the most direct check available to a buyer, and it complements reading the report carefully, as in our COA reading guide.
Research use only. This guide explains analytical and chemical concepts for educational purposes. Baltic Peptides supplies its compounds strictly for laboratory research; they are not medicines and are not for human or veterinary use.
How the Janoshik system works
According to the Janoshik help centre, a report can be verified through the verification page or by scanning the QR code on the report, if available. A report should contain a task number at the top and a unique key at the bottom, and if either identifier is missing it cannot be verified. The lab recommends requesting the full version of the report from your vendor containing both.
Once found, the report can be opened from the lab’s system. The lab states that a report is considered legitimate only if it matches the version stored in its system, and that any alteration means it cannot be considered legitimate.
Step by step
- Get the full report showing the task number and the unique key.
- Open the laboratory website yourself, by typing the address, rather than following a link from the seller.
- Find the verification page and enter the task number and key exactly as printed. The key is written in capitals.
- Open the stored report and compare it field by field with your copy.
- Check the details against your vial: compound name, batch code, date, test type and result.
What to compare
| Field | What a match means |
|---|---|
| Compound name | The lab tested what the seller says it did |
| Batch or sample code | The report relates to the production run on your label |
| Test date | The result is recent and not recycled |
| Result and unit | Purity percentage, or content against a claimed amount |
| Test type | Whether identity (mass) was tested, or only purity |
What verification does not prove
- It does not prove the vial matches the batch. The report belongs to a sample; the batch code on your vial is the link, so check they match.
- It does not show how the sample was chosen. A sample picked and sent by a seller is different evidence from one bought anonymously.
- It does not speak to accreditation. Ask a laboratory about its method and any accreditation separately.
- A purity-only report cannot confirm identity. A substituted compound can be perfectly pure, so look for a mass result as well.
Red flags on a certificate
- No task number or unique key.
- A verification link that points to a domain other than the lab.
- Result fields that do not match the lab record, or a missing record.
- Round-number purity with no chromatogram or mass spectrum.
- A batch code that does not match your vial.
How Baltic Peptides publishes its results
The Baltic Peptides COA page lists each certificate with its batch code, test date, laboratory and result, and its FAQ explains that every result links to the laboratory’s own record of the test through a “Verify on Janoshik” link. Two compounds, Bromantane and Noopept, are marked as in-house results rather than independent ones, and the page says these are clearly labelled while third-party results are pending. In-house results cannot be verified with an outside lab, so treat them accordingly. For blends and reagents the page reports content against the label claim instead of purity. See batch numbers and traceability for how a batch code connects the vial to the report.
See how to store peptides and the guide to reading a peptide COA. Batch reports are on the COA page.
Sources and further reading
- Janoshik help centre: How can reports be verified? help.janoshik.com
- Janoshik verification page. janoshik.com/verification
- Baltic Peptides certificates of analysis page. balticpeptides.com/coas
All Baltic Peptides products are supplied strictly for laboratory research use. They are not medicines, supplements or food and are not for human or animal use. This article explains analytical and chemical concepts and is for educational purposes only.
FAQ
Common questions
How do you verify a peptide COA?
What if a report has no task number or unique key?
Should I use the verification link the seller gives me?
What does it mean if the stored report differs from my copy?
Does verification prove the vial contains what the report says?
Can a purity-only COA confirm what the compound is?
Can I verify the in-house results on the Baltic Peptides COA page?
Keep reading
Related reading
How to read a peptide COA
The 9-step checklist for any certificate of analysis.
Peptide batch numbers and traceability
How a batch code ties a vial to a report.
Peptide mass spectrometry
How mass confirms identity.
Every batch published with its lab report
Independent HPLC and mass spec results for every batch, dispatched from the EU.
