Lab guide · Handling
How to Store Peptides: Lyophilised & Reconstituted Storage Guide for the Lab
How to store peptides so they stay stable: the right temperatures for lyophilised and dissolved peptides, how to handle vials without introducing moisture, which sequences degrade fastest, and how long peptides last.
Key takeaways
- Keep peptides lyophilised, sealed, dry, dark and cold until needed.
- -20 °C or colder for long-term storage; 2-8 °C only for short periods.
- Warm vials to room temperature before opening to avoid condensation.
- In solution, aliquot and freeze; avoid repeated freeze-thaw cycles.
How to store peptides: the short answer
If you only need the essentials of how to store peptides in a research setting:
- Keep peptides lyophilised (freeze-dried) until you need them. That is their most stable form.
- Store lyophilised vials sealed, dry, dark and cold: -20 °C for long-term, colder if available.
- Let a cold vial reach room temperature before opening, so moisture doesn’t condense on the powder.
- Once in solution, aliquot and freeze, and avoid repeated freeze-thaw cycles.
- Expect a shorter shelf life for sequences containing Cys, Met, Trp, Asn or Gln.
Storing lyophilised peptides
Most of how to store peptides comes down to one idea: keep water away. Freeze-drying removes water, which slows almost every degradation reaction. Kept dry, cold and sealed, most lyophilised peptides stay stable for a long time. Bachem recommends keeping peptides as the lyophilisate in a tightly closed container below -15 °C for longer storage, with lower temperatures (around -50 °C or below) preferred for long-term storage.
Short-term storage
For peptides you will use within weeks, a laboratory fridge at 2-8 °C is generally acceptable for sealed lyophilised vials. Protect them from light and keep them in a sealed container with desiccant if the fridge is opened often.
Long-term storage
For months or years, store at -20 °C or colder. Merck (Sigma-Aldrich) advises -20 °C or colder, away from bright light, and notes that moisture exposure reduces long-term stability.
Shipping at room temperature is normal. Lyophilised peptides are routinely shipped at ambient temperature and stay stable for days to weeks in transit. Move them to cold storage on arrival. Our EU shipping offers optional cold-chain packaging if you prefer it.
Handling a vial without damaging the peptide
Good handling is as much a part of how to store peptides as the freezer temperature.
- Warm before opening. Take the vial out of the freezer and let it reach room temperature (ideally in a desiccator) before you open it. Opening a cold vial pulls moist air onto the powder.
- Work quickly. Weigh out what you need and reseal the vial promptly.
- Spin it down. A short centrifuge spin collects powder from the cap and walls before reconstitution.
- Inert gas for sensitive sequences. For peptides with Cys, Met or Trp, flushing the vial with dry nitrogen or argon before resealing reduces oxidation.
- Return to cold storage straight away, and label the vial with the date it was opened.
Lab safety: peptides are biologically active in small amounts. Bachem advises wearing gloves, safety goggles and a dust mask when handling lyophilisates.
Storing peptides in solution
How to store peptides once they are dissolved is a different question, because peptides are much less stable in solution. Water enables hydrolysis, deamidation and oxidation, and microbes can grow in non-sterile solutions. Good practice for research solutions:
- Prepare only what you need, as close as possible to the experiment.
- Use sterile solvents and buffers. Merck notes that sterile buffers at pH 5-6 and frozen aliquots prolong the life of peptides in solution.
- Aliquot into single-use volumes so each portion is thawed only once.
- Freeze aliquots at -20 °C or below for anything beyond a few days.
- Avoid frost-free freezers, whose warming cycles cause small repeated temperature swings.
For reconstituting lyophilised peptides in the lab, a sterile reconstitution solution is available for research use. Remember to calculate concentration from the real peptide mass, not the label weight (see net peptide content).
Reconstituting peptides in the lab
How to store peptides after reconstitution starts with dissolving them well. Solubility depends on the sequence, so general laboratory practice is to work out the peptide’s overall charge first:
| Peptide type | Usual first solvent |
|---|---|
| Basic (net positive charge) | Sterile water; if needed, a little dilute acetic acid |
| Acidic (net negative charge) | Sterile water; if needed, a little dilute ammonium bicarbonate |
| Hydrophobic / neutral | A small volume of organic solvent (e.g. DMSO), then dilute with buffer |
Merck’s peptide solubility protocol walks through this charge-based approach in detail. Always test solubility on a small portion first, add solvent gently down the side of the vial, and swirl rather than shake to avoid foaming.
Bacteriostatic vs. sterile water in the lab
Sterile water contains nothing but water and has no preservative, so once a vial is opened it should be used promptly. Bacteriostatic water contains 0.9% benzyl alcohol, which inhibits bacterial growth and makes it suitable for multi-use vials in the lab. Benzyl alcohol can interfere with some sensitive assays, so choose the solvent to suit the experiment. Our reconstitution solution is supplied for laboratory research use.
Why repeated freeze-thaw cycles damage peptides
Freeze-thaw cycles are the most common reason guidance on how to store peptides insists on aliquots. Each freeze-thaw cycle concentrates the peptide and any salts in pockets of unfrozen liquid, changes local pH, and exposes the solution to air when the tube is opened. Over several cycles that can cause aggregation, oxidation and loss of peptide onto tube walls. Single-use aliquots avoid the problem entirely: thaw one, use it, discard the remainder.
Peptide storage checklist for the lab
- On arrival: check seals, note the batch number and match it to the COA.
- Store lyophilised vials at -20 °C or colder, in a sealed container with desiccant, away from light.
- Label each vial with the receipt date and, later, the opening date.
- Warm to room temperature before opening; weigh quickly; reseal; return to cold storage.
- Reconstitute only what you need; aliquot the rest into single-use volumes and freeze.
- Keep a log of batch, concentration (from real peptide mass) and storage location.
Light, humidity and oxygen
Temperature gets the most attention, but three other factors matter almost as much when deciding how to store peptides:
- Light: UV and bright light accelerate oxidation, especially of tryptophan. Store vials in their box or an opaque container.
- Humidity: lyophilised powder is often hygroscopic. Keep vials sealed, store them with desiccant, and never open a cold vial.
- Oxygen: every opening lets in air. For oxidation-sensitive sequences, flush with nitrogen or argon before resealing, and prefer smaller vials so less is exposed each time.
Copper peptides, blends and multi-vial orders
Copper peptides such as GHK-Cu are coloured complexes and should be kept dry and dark like any lyophilised peptide; a change in colour or texture is a sign to re-check. Blends such as KLOW follow the storage needs of their most sensitive component. For multi-vial and wholesale orders, keep unopened vials frozen and only bring out what you need, so the rest of the batch never goes through a temperature cycle.
Which peptides degrade faster?
How to store peptides also depends on the sequence. Certain amino acids make a peptide more vulnerable:
| Residue | Main risk | Storage tip |
|---|---|---|
| Cysteine (C) | Oxidation, disulfide formation | Inert gas, avoid basic pH |
| Methionine (M) | Oxidation to sulfoxide | Inert gas, minimise air exposure |
| Tryptophan (W) | Oxidation, light sensitivity | Protect from light |
| Asparagine (N), Glutamine (Q) | Deamidation in solution | Keep lyophilised; short solution storage |
| Aspartic acid (D) | Isomerisation and cleavage in solution | Avoid long storage in solution |
Copper peptides such as GHK-Cu and longer sequences such as TB-500 benefit from the same basics: dry, cold, dark and sealed.
Signs a peptide may have degraded
- The powder has become sticky, clumped or glassy (it has taken on moisture).
- A previously clear solution is cloudy, coloured or has particles.
- It no longer dissolves the way it did when fresh.
- Results drift between experiments using the same batch.
Visual checks only catch obvious problems. If it matters, re-testing by HPLC is the way to confirm purity hasn’t dropped; new degradation peaks appear as extra peaks on the chromatogram.
How long do peptides last?
There is no single answer to how long peptides last, or how to store peptides for a set period: it depends on the sequence, the form and the storage. As general laboratory guidance from peptide manufacturers:
| Form and storage | Typical stability |
|---|---|
| Lyophilised, sealed, room temperature | Days to weeks (shipping, short handling) |
| Lyophilised, 2-8 °C | Weeks to months |
| Lyophilised, -20 °C or colder | Months to years |
| In solution, 2-8 °C | Days |
| In solution, frozen aliquots | Weeks to months, sequence-dependent |
Merck (Sigma-Aldrich) notes that lyophilised peptides shipped at ambient temperature remain stable for days to weeks. Always check the batch date on the certificate of analysis to know how old your material is.
Common storage mistakes in the lab
Most problems with how to store peptides come down to a handful of habits:
- Opening vials straight from the freezer, letting condensation into the powder.
- Repeatedly thawing one stock solution instead of using single-use aliquots.
- Storing in a frost-free freezer with warming cycles.
- Leaving vials in the light on the bench or in a clear fridge door.
- Losing traceability: not recording the batch number and opening date on the vial.
Receiving peptides in Europe
How to store peptides starts the moment the parcel arrives. Our orders ship from Lithuania with tracked delivery across the EU, so most parcels arrive within a few days and well inside the ambient stability window of lyophilised peptides. On arrival: check the seals, move vials to cold storage, and note the batch number against the published report on our COA page. Questions about a specific compound’s storage can go to our support team.
Sources and further reading
- Bachem. Handling and storage guidelines for peptides. bachem.com
- Bachem. How to handle a peptide lyophilizate. bachem.com
- Merck / Sigma-Aldrich. Synthetic peptide handling and storage protocol. sigmaaldrich.com
- Merck. Handling and storage guidelines for peptides and proteins. merckmillipore.com
- D’Hondt M. et al. (2014). Related impurities in peptide medicines (degradation pathways). J Pharm Biomed Anal 101:2-30. PubMed
All Baltic Peptides products are supplied strictly for laboratory research use. They are not medicines, supplements or food and are not for human or animal use. This article explains analytical testing and is for educational purposes only.
FAQ
Common questions
How should lyophilised peptides be stored?
Can peptides be stored at room temperature?
Should I store peptides in the fridge or freezer?
Why let a vial warm up before opening?
How long are peptides stable in solution?
Which peptides are least stable?
Do peptides need cold-chain shipping?
How can I tell if a peptide has degraded?
Keep reading
Related reading
How to read a peptide COA
The 9-step checklist for any certificate of analysis.
HPLC peptide testing explained
How purity is measured, and how degradation shows up.
Net peptide content explained
Calculate the real amount of peptide in a vial.
Fresh batches, tested before they ship
Every batch is independently tested and dispatched from Lithuania with tracked EU delivery.
