Lab guide · Lab methods
What Is Lyophilisation? Why Peptides Are Supplied Freeze-Dried
What is lyophilisation? It is freeze-drying: water is frozen into ice and then removed by sublimation under vacuum, leaving a dry, porous solid. This guide explains the three stages, why research peptides are supplied this way, what residual moisture means and where the process can cause stress.
Key takeaways
- Lyophilisation (freeze-drying, also spelled lyophilization) removes water by freezing, then sublimating ice under vacuum, then desorbing the remaining bound water.
- Peptides are supplied lyophilised because water is needed for most chemical degradation routes, so a dry solid is far more stable than a solution.
- Residual moisture is a quality attribute: lyophilised peptides are generally more stable at low water content, often below about 3%.
- The process itself stresses peptides, and the final powder remains hygroscopic, so keeping it dry still matters after freeze-drying.
What is lyophilisation?
What is lyophilisation? Lyophilisation, also called freeze-drying and often spelled lyophilization, removes water through sublimation from a frozen product: ice turns directly into vapour without melting. A review of pharmaceutical freeze-drying describes the first removal of ice as primary drying and the later removal of non-frozen, bound water as secondary drying.
The result is a dry, porous solid, often called a cake, that is easy to dissolve again and is far less prone to chemical change than the original solution.
Research use only. This guide explains analytical and chemical concepts for educational purposes. Baltic Peptides supplies its compounds strictly for laboratory research; they are not medicines and are not for human or veterinary use.
Why peptides are supplied freeze-dried
The reason is chemical. A review of peptide and protein instability notes that the presence of water is required for most covalent degradation, such as fragmentation and isomerisation, so removing water is an effective way to mitigate instability. In the solid state, a peptide has far less molecular mobility, which slows hydrolysis, deamidation and aggregation.
Freeze-drying also makes the product lighter and easier to ship and store than a liquid, since a dry powder does not need to stay frozen to remain intact. How these routes work is covered in peptide degradation.
The three stages
| Stage | What happens | Why it matters |
|---|---|---|
| Freezing (with optional annealing) | Water becomes ice crystals; solutes concentrate between them. | Ice crystal size sets the pore structure and drying behaviour. |
| Primary drying | Ice sublimates under vacuum with gentle heat; vapour is collected on a condenser. | Removes most of the water. |
| Secondary drying | Temperature rises under vacuum to desorb bound water. | Sets the residual moisture level. |
A 2026 review of lyophilisation strategies describes the same three stages and adds that annealing during freezing can give more uniform crystals and lower residual moisture.
The cake and its excipients
Peptides at low concentration may not form a robust cake on their own, so a bulking agent such as mannitol is often added. A study of a peptide formulation lyophilised with mannitol shows the pattern: the cake resisted chemical degradation in the solid state over the period tested, and aggregation was not detected afterwards (PMC). Whether a research vial contains an excipient depends on the product and should be on its documentation.
Residual moisture
Lyophilised peptides are generally more stable at lower water content, below about 3%, because higher residual moisture raises molecular mobility and chemical instability in the solid state (PMC). The relationship is not always monotonic: in a study of lyophilised antibodies, degradation reached a minimum at 2-3% water, not at zero (PubMed).
Moisture is usually measured by Karl Fischer titration, and it is one reason a vial can be 99% pure and still contain less peptide than its label weight, as explained in net peptide content.
What the process does to a peptide
Freezing and drying are themselves stressful. The peptide review notes that the process requires the sample to be frozen and then dehydrated, which can alter structure, and that peptides containing Cys, Met or Trp are prone to oxidation, accelerated by freeze-thaw cycles (PMC). Freeze-drying therefore reduces long-term degradation, but it does not make the product indestructible.
What freeze-drying does not do
- It does not purify. Impurities present before freeze-drying are still there afterwards.
- It does not make the powder moisture-proof. Lyophilised peptides are often hygroscopic, so an open vial can take up water from air.
- It is not a sterilisation step.
- Cake appearance is not a purity or identity test.
Lyophilisation on the certificate and in storage
Moisture content, when measured, appears on a full analytical report, and the net peptide content explains how water and counter-ions reduce the peptide share. For handling, keeping vials sealed and dry is the main practice. See how to store peptides and the guide to reading a peptide COA. Batch reports are on the COA page.
Sources and further reading
- New trends in freeze-drying of pharmaceutical products (2023). PMC
- Stabilization strategies and advancements in lyophilization to preserve integrity (2026 review). PMC
- Strategies for overcoming protein and peptide instability in biodegradable drug delivery systems (2023). PMC
- Effect of sorbitol and residual moisture on the stability of lyophilized antibodies. PubMed
All Baltic Peptides products are supplied strictly for laboratory research use. They are not medicines, supplements or food and are not for human or animal use. This article explains analytical and chemical concepts and is for educational purposes only.
FAQ
Common questions
What is lyophilisation?
Why are peptides freeze dried?
What are the three stages of lyophilisation?
What is residual moisture in a lyophilised peptide?
Is a lyophilised peptide pure?
What is a lyophilised cake?
Can lyophilised peptides still absorb water?
Keep reading
Related reading
Peptide degradation
The chemical routes that freeze-drying slows down.
Net peptide content explained
Why water and counter-ions reduce the peptide share.
How to store peptides
Storage and handling for lyophilised research compounds.
Lyophilised peptides with a published COA
Independent HPLC and mass spec results for every batch, dispatched from the EU.
