Lab guide · Quality and testing
Endotoxin and Heavy Metal Testing Explained for Research Peptides
Endotoxin and heavy metal testing measure two kinds of contamination that HPLC and mass spectrometry do not see: bacterial lipopolysaccharide and toxic elements such as lead or cadmium. This guide explains what each test detects, the standard methods and units, why a clean purity result says nothing about either, and what a certificate does and does not tell you.
Key takeaways
- Endotoxin is lipopolysaccharide from Gram-negative bacteria, measured by the LAL test and reported in endotoxin units (EU).
- Elemental impurities are tested by ICP-MS or ICP-OES; ICH Q3D Class 1 elements are arsenic, cadmium, mercury and lead.
- HPLC and mass spectrometry measure the peptide and its related impurities, so they cannot see endotoxin or trace metals.
- Standard certificates may not include either test: the Baltic Peptides COA page says endotoxin and sterility testing can be arranged for custom orders.
Why these tests exist
Purity by HPLC tells you how much of a sample is one peptide, and mass spectrometry tells you what it is. Neither detects a bacterial contaminant that is not a peptide, or a metal carried in from a reagent or container. Endotoxin and elemental impurity tests fill those gaps. They matter most when material is used in cell-based work, where trace contamination can confound a result.
Research use only. This guide explains analytical and chemical concepts for educational purposes. Baltic Peptides supplies its compounds strictly for laboratory research; they are not medicines and are not for human or veterinary use.
What endotoxin is and how it is measured
Endotoxin is the lipopolysaccharide shed from the outer membrane of Gram-negative bacteria. It is detected with an amoebocyte lysate made from horseshoe-crab blood, which reacts to endotoxin. The European Pharmacopoeia chapter on bacterial endotoxins describes three techniques: gel-clot, turbidimetric and chromogenic. ICH Q4B Annex 14 records that the test is harmonised between the pharmacopoeias, that the photometric methods rely on endotoxin-induced optical changes, and that endotoxin is expressed in endotoxin units (EU), where one EU equals one International Unit.
The result is usually reported in EU per mL or per mg. A recombinant factor C assay is described as a validated alternative to the lysate.
Limits and why sterility is not the same
For pharmaceutical products, the endotoxin limit is calculated as K/M, where K is the threshold exposure (5 EU/kg for parenteral products) and M the maximum dose per kg per hour. That framework belongs to licensed medicines and does not describe research material. For research use, the more relevant point is that endotoxin is heat-stable and survives killing the bacteria, so a sterile sample is not automatically endotoxin-free, and sterility and endotoxin are separate tests.
Heavy metals and elemental impurities
Elemental impurity testing follows the ICH Q3D classification. According to the Sigma-Aldrich elemental impurities guide, the Class 1 elements, arsenic, cadmium, mercury and lead, are human toxicants with limited or no use in manufacturing, and they can arrive through mined excipients and other materials. The guide notes that USP chapter 233 suggests ICP-OES or atomic absorption for parts-per-million levels and ICP-MS for parts-per-billion levels.
An important nuance for this series: some peptides contain a metal on purpose. GHK-Cu is a copper complex, so a metals screen has to distinguish an intended copper content from contamination.
What each test covers
| Test | Measures | Typical unit | Covered by HPLC/MS? |
|---|---|---|---|
| HPLC purity | Share of sample that is the target peptide | Area % | Yes |
| Mass spectrometry | Identity by mass | Da | Yes |
| Net peptide content | Peptide share by weight, after water and counter-ions | % | No |
| Endotoxin (LAL) | Bacterial lipopolysaccharide | EU/mL or EU/mg | No |
| Elemental impurities (ICP-MS) | Trace metals such as As, Cd, Hg, Pb | ppm or ppb | No |
What a certificate usually covers
Most certificates for research peptides report purity or content and a mass result. The Baltic Peptides COA page states that standard testing covers HPLC purity or content and mass identity, and that endotoxin and sterility testing can be arranged for custom orders. Absence of an endotoxin or metals line therefore means the test was not performed, not that the result was clean. Read what is listed with the COA reading guide, and confirm authenticity with the lab as described in how to verify a peptide COA.
Limits of these tests
- An endotoxin result applies to the sample tested and the method used; interfering substances can affect the assay.
- Metals screens depend on the elements chosen and the detection limit.
- A pass against a pharmaceutical limit does not mean the same limit applies to research use.
- No test replaces the others, and none tells you about identity or purity.
See how to store peptides and the guide to reading a peptide COA. Batch reports are on the COA page.
Sources and further reading
- ICH Q4B Annex 14: bacterial endotoxins tests general chapter (EMA). ICH Q4B Annex 14
- Elemental impurities and certified reference materials, ICH Q3D and USP 232 (Sigma-Aldrich technical article). Sigma-Aldrich elemental impurities guide
- Endotoxins 101: guide to bacterial endotoxin and LAL testing (Thermo Fisher). Thermo Fisher
- Baltic Peptides certificates of analysis page, FAQ on testing scope. balticpeptides.com/coas
All Baltic Peptides products are supplied strictly for laboratory research use. They are not medicines, supplements or food and are not for human or animal use. This article explains analytical and chemical concepts and is for educational purposes only.
FAQ
Common questions
What is endotoxin?
How is endotoxin tested?
What is an endotoxin unit?
Which heavy metals are tested?
How are heavy metals measured?
Does HPLC purity cover endotoxin or metals?
Does the Baltic Peptides COA include endotoxin or heavy metal results?
Keep reading
Related reading
How to read a peptide COA
The 9-step checklist for any certificate of analysis.
How to verify a peptide COA
Confirm a report with the testing lab itself.
What is HPLC?
What the purity figure does and does not cover.
Every batch published with its lab report
Independent HPLC and mass spec results for every batch, dispatched from the EU.
